Friday, August 5, 2011

Omron CX-One

CX-ONE is released by Omron is an integrated software tool that can be used for all Omron PLCs and components. Thus, with just one software CX ONE, can be used for setting PLC, touch screen, servo, positioning, temperature, networking and so on.
System Requirements
  • Operating system: Microsoft Window XP (service pack 3 or higher), Microsoft Window Vista, Microsoft Window 7.
  • Computer and Memory : processor recomended by Microsoft.
  • Hard Disk : minimum 3.4 GB for installing the complete CX-ONE.
  • Display : XGA (1024X768) 16 bit or better.
  • Communication ports: RS 232C, USB and Ethernet. 
  • Registration: intenet connection is necessary.
Contents of CX-ONE

CX-Programmer
to create and debug PLC program Sysmac CS/CJ/CP/NSJseries, C series, CVM1/C series and also to create and monitor Sysmac CS/CJ high speed psoition control.
CX-Integration
to set up FA network, such controller link, deviceNet, CompoNet, CompoWay, and Ethernet networks. this also includes DeviceNet cnfiguration, Routing table and data link component.
CX-Protocol
to create protocols or communication sequences between CS/CJ/CP/NSJ or C200HX/HG/HE communications board and other general purpose external devices.
CX-Position
to create and monitor data Sysmac CS/CJ series positioning control unit except for high speed type.


CX-Motion NCF
to create and monitor data Sysmac CS/CJ series positioning control unit and servo driver with Mechatrolink-II communications.


CX-Motion MCH
to create data, motion program, and monitor data Sysmac CS/CJ series MCH unit.


CX-Motion
to create and monitor data Sysmac CS/CJ, C200HX/HG/HE, CVM1/CV series motion control unit.


CX-Drive
to set and control data inverter and servo motor.
CX-Process Tool
to create and debug function block for Sysmac CS/CJ series loop controllers (loop controller unit/boards, process control CPU unit, loop control control CPU units)

CX-Designer
to create screen data of NS series PT.


CX Configurator FDT
to set various units by installing its DTM module. 
CX-Thermo
to set control and control parameters temperature control.
Network Configurator
to set tag data links Sysmac CJ2(built in ethernet/IP) CPU and ethernet/IP unit.
CX-Server
CX-One application to communicate with Omron components such as PLC, display, temperature control. 


Switch box utility
to monitor I/O and change present value of PLC


CX-simulator
to simulate Sysmac CS/CJ/NSJ series CPU unit.


Face plate autobuilder for NS
Output screen data as project files for NS series PTs from information function block created by CX-Process tool.


NV Designer
to create screen data of NV series PT.


CX-FLnet
to set up and monitor Sysmac CS/CJ series FLnet.


PLC Tools
CX-ONE applications component which installed automatically. such as CX-Programmer and CX-Integrator, I/O tables, PLC memory, PLC setup, PLC error logs, File memory, PLC Clock, Routing and data table.

No comments:

Post a Comment